Quote:Quote:I think 2 ohms is way too much. Also I seem to remeber the blaster 2 coil should use a .8 ohms resistor? According to the Mopar Performance catalog..When using a Blaster coil, the correct ballast resistor value is 0.25 Ohms which is Mopar #P2444641.Good advice, take the 2 ohm resistor and pitch it. Just my $0.02..
Quote:I think 2 ohms is way too much. Also I seem to remeber the blaster 2 coil should use a .8 ohms resistor?