Quote:

---

!!!! LISTEN !!!! Nobody pays us to come here and waste time typing out information that some of us learned the hard way so LISTEN UP!!!!


YOU CAN NOT CHECK TIMING MARK ACCURACY BY LOOKING IN A SPARK PLUG HOLE


Now your's may well be accurate but you haven't checked anything. That mark could be 10* or more of TDC and you wouldn't be able to tell just by looking

---

Whoa easy guys!! Unfortunately I do not own my own mac tools truck and I don't have the stop and couldn't find one at any shop in town so ordered it from Summit yesterday. I should have stated that in the update post.

I'll still be checking it next week when the stop arrives. This was just a basic check to see if the harmonic balancer mark even showed up on timing tab at what "appeared" to be near the top on the compression stroke.

I will keep you all updated when the tool arrives and I sincerely appreciate everyone's input.