Another head that drops right in the middle of a sea of mundane offerings to power a BBM down Main St.. What's that, about a dozen or more BBM heads that can't outflow a decent SBC piece, but still have the ability to bust a piece of junk 45 year old block???
No good iron, or CG blocks and not a single head casting that can top the ancient PSO.
I NEVER thought I'd see a day when it was better to be a Pontiac guy, as far as the performance aftermarket and R & D worlds are concerned. What's next.....another stock style HEMI head???
What an absolute farce the MOPAR aftermarket is......
Trick Flow doesn't make blocks...perhaps you should whine to Block companies about the lack of BB mopar blocks...and not whine about getting a better quality of cylinder head than most of the current offerings.
Reading comprehension issue???
Did I SAY they make blocks???
I guess all these low power engines need a "better quality" cylinder head because the Ebrock, Indy, B1 and whatever other heads are out there in this category of cylinder head are just coming apart at the seems.
OU812 doesn't have a reading comprehension issue.
Trick Flow doesn't make *any* products of the type you want, and you're upset because they're releasing something new of what they *do* make. If we follow your logic there should be no new products permitted by anyone unless they release a cylinder block first. Are you upset at all the different intake manifolds out there too???
So go get a home equity loan, find a pattern shop and casting house, and start working on it yourself. You'll find out quick why companies aren't flocking to do blocks.
Obviously you have the same reading comprehension issue.
Since my keyboard doesn't type in crayon, perhaps you should go back and re-read (SLOWLY) my original post.
Point out where I bemoaned Trick Flow not making blocks, as OU812 alluded to, or where I stated it should be Trick Flow that produces an upgrade to the ancient PSO, or Millennium HEMI.
If you, or anyone else cannot understand what you are reading, why comment and prove to the world your lack of comprehension??? No self esteem, perhaps??? Ignorant, perhaps??? An OU812 butt-hurt cheerleader, perhaps???
Ha ha ha....your reply seems to describe yourself more than anyone else could have!
Certainly not you, or that other simpleton.....
What's the problem......upset that you can't deny a single point in my original post, so you took it completely out of context in your idiotic response, or are your feelings hurt because I didn't pen a glowing welcome to yet ANOTHER run-o-the-mill cylinder head for a BBM that couldn't sniff a decent SBC, or SBF offering???
Why can't you just be happy for us little peons with the street/strip cars in the 400-600 hp range??? If their claims are true and they really are ready to bolt on (I know that might be a big if), they've made a head that will outflow both the RPM and the standard-port Indy EZ and beat both in price when you factor in not having to take them into someone before you can even think about using them. And why shouldn't they start with the head that they would sell the most of as the first offering?
How many total racers are even out there running something that needs more than what these can do compared to how many of us are out there with street/strip cars having fun driving our cars everywhere and driving them to the track?
Are you upset at all the different intake manifolds out there too??? 
