Quote: How close to straight on was the rotor to the cap terminal?
As far as I could tell (and remember) it was pointing right at the terminal. If you need to know if it was pointing a little before or after the centerline of the terminal I'll have to take another look (which will have to be tomorrow I'm afraid)
I only blipped the throttle to about 1/3 open- probably got up to around 2500 rpm- didn't try to do a WOT. But even so I would've thought that I'd see at least a little movement? But I'll try it again tomorrow, checking both with and without the vacuum line connected (and plugged when not) and report in then.
