Quote: the new rotor with the .060" longer blade and it fits great- a much smaller gap than with the original rotor, and the rotor tip misses the bases of the plug wire terminal posts by at least a 1/8". So it looks like the original problem is taken care of...
Not yet , 1/8" is way too much, we want the tip up to the same height as the vertical part of the metal cap terminal and as close as .010-.015" laterally to the terminal(s) tho it will be more than that (unmodified) even with the MO 3000 rotor
I've taken pictures which I'll post tonite (I'm at work right now) - they're not the best pics, but they should be good enough.
The distance between the vertical part and the tip of the rotor is VERY small- about 1/16-1/32" (I didn't measure the gap, that's eyeballing it) But you're saying I need a bigger distance than 1/8" between the top of the tip of the rotor and the base ('base' being the horizontal flat portion) of the spark plug wire terminal?
, 1/8" is way too much, we want the tip up to the same height as the vertical part of the metal cap terminal and as close as .010-.015" laterally to the terminal(s) tho it will be more than that (unmodified) even with the MO 3000 rotor 
