I was on the ph with Mike at Rossler and there is no real way to save my drive shaft with a shorter th400 even with a 9" tail output it comes more than an inch short.I can get a longer th400 yoke 6" I believe but is not enough.The th400 is 33"7/8"long bell to tail.and the 727 35"1/4"
ps:I indexed my trans on the firewall and marked center so I can test fit the new trans asap.The engine has 2" to the firewall from the back of the engine.

Last edited by Clanton; 04/21/20 07:07 PM.
GOTBOOST!New improved with Victor heads.
http://www.enginelabs.com/mopar-big-bloc...t-of-necessity/