If you would have got the ignitor 11 and matching coil you can by pass the ballast and just hook red wire to + side of coil and the other wire to the - side of the coil.
I can do that anyway. I need to know how to wire the setup while including the ballast resistor so everything looks correct too. The ballast has a single blue wire on the passenger side or upside and a blue and brown wire on the lower post or toward the drivers side. The assembly manual says the single blue wire is ignition 1 the brown and blue wire is ignition 2. The Pertronix directions say to wire it to the ignition switch side of the resistor. Which post is it? I've attached the instructions.
