this little jem of a bracket will make it ez to go hydro clutch in something else.

the 85 cab does not have the holes for the 4 bolts but could be welded right in place once a hole in the fire wall is cut. if a mech linkage set of pedels are on hand, they would just need a small piece welded up for MC hook up.

with the correct v-6/v-8 hydro bellhousing the 833/833OD/5-speed can be used.

been scratching around in the JY and have come up with a bracket/pedels from a truck.

picked up a 94 DAK/AX-15 5 speed with its own 9 bolt hydro bell housing. free fit the budget, just hauled the rest off for the owner some recycler cash.

looks like the folks over at dodge did not have to think too hard to come up with the hydro system upgrading the antique mech linkage.