Quote:

Well if you was careful.. and you got the tools to take the springs off. you could at lease get a feel for them. lot of diff ways to do this..I would not pull the head to check it out some.




I can use a leak down tester to pressurize the cylinder and keep the valves from dropping, right?

I have a "on head" spring compressor, ordered it for these types of heads (individual mounted rockers like on these Magnum engines) but I just haven't used it yet. what would I feel for though? just smooth movement? no binding or rubbing? how tight is "too tight"? --if the rockers all check out good...


**Photobucket sucks**