While you guys are at it, sounds like you may know more about models than I. Perhaps check around to see if some version of the lift off hood scoop is avaialable from a model maker.
I am looking for either just the scoop, which might be found through some of these custom resin shops who supply model making hobbyists with custom parts....
Or...
We might go with the entire hood which came on the Revell Monogram 69 super bee. I see on their site they have a 'lost part' form where you can order special parts from kits. I'd need the kit number for their 69 lift off hood bee kit (if anyone has that handy) then I can run the 'lost part' route through.
Whatever we can find that would sit on the bill of a cap and look like a 69 hood scoop. You guys who are up on models might have some ideas on this. I figure we need about 50, plus or minus, to go around and have some extra.
I'm sending emails to possible suppliers with this link so they know what it looks like:
and I'm asking for one that is approx 3 inches by 3 inches by 1/2 to 1 inch high.
I'm a busy guy just like the rest of you and doing this search inbetween paperwork, roof inspections, and other much more important work (car). If you fellas could help run down this scoop I'd be very thankful and it'd make the hat project much easier for me.
Here's a link you can run through and check out. Send emails to those you think could help.
