I put on the sheetmetal to once again fine tune the panels and index them for easy final installation. It is coming together...and the panels were a little easier than I expected. Certainly not just bolt them on and go. Definitely a ton of move them this way and that way to get them all lined up. But, no big surprises. Only thing is I might have to trim the rocker (horizontal area) adjacent to where it spots to the pinch weld. It is a little to wide and it is kicking the lower quarter area out to far to line up with the door and forward rocker. I guess to be expected. AMD stuff is great in general.
Here are some pics before they come off again for other finishing items before they go on for good.