When building a back half car with 4-link setup, in what order do the following steps/items happen in? What needs to be figured out first that would determine specific items ordered?
Certain things known: 1) Wheelbase established. 2) Tire size known (rim backspacing undetermined) 3) frame rail spacing established (26") 4) Tub size established (40")
I do not know the following yet (and need to determine the order which to figure them out) 1) ride height 2) Rear end housing width 3) backspacing of 15 X 15 rims 4) tub install height (based on ride height)
For mock up purposes for the build, do I just need the tire/rim to establish rear end width and tub location?
I know it is a lot of questions, but you guys have the knowledge.
Thanks, Greg.
Buy the EXACT wheels and tires your going to race with.....don't guess or estimate......
that will determine alot.,, then set it at the ride height you want... that will determine the height you need for the tubs(make sure you leave enough for tire growth)
that will determine alot.,, then set it 
