Quote: I believe your frame connectors should come straight back from the front frame/ crossmember to the 4 link crossmember that is tied into the body rocker panels that should be there.
Yes, but the problem is it should be tied into the rear x-member right where the rear frame rails kick down...and that is only 26" wide. That brings me right into the torsion bar mounts if I go straight up front with them. If I kick them out wider in the front, I can't remove the torsion bars. And if I mount them at the rear wider so they are straight, I am sacrificing alot of support for the 4 link area which takes all of the power through that area.