I am deciding to make yet another thread, since obviously most people wont read and reply to each post on my other threads. So to keep it simple, first heres the link to my original idea: Original 440 build

Fyi it will be a manual 5 or 6 speed, but most likely a 6 speed (tko600 or t56)
1. I have since decided to get the SD intake, and most likely a hydraulic roller cam.
2. If i want to make that power and torque with essentially everything the same, would i need to stroke it?
3. When it comes to a cams operating rpm, if its a 2200-6000 would i have to rev higher in first gear to move it on the street compared to a 1800-6000? Thats what i need to really understand.
4. Any suggestions on hydraulic roller cams (for w/ a stroker or w/o a stroker)? (And preferably with an operating rpm that begins anywhere from idle-2200 and goes to 5800 or more, if im not wrong on how operating rpm works)
5. I may edit this post (and italicize the changes) if i forgot to mention anything
6. What does everyone think about the lunati 60311? Would it work good with either the stock stroke or stroker? Adv duration: 270/278, duration @.050: 219/227, .515/.530 lift, 112 lsa/106icl