Quote:

Thanks Goody
My defenision on bump steer is just how the car behaves on the street when I hit a hole or a bump in a corner. Does the car alter direction? Does the suspension get unsettled? Does it loose grip? No it doesn't. I might get to borrow a bump steer gauge to measure, but no promises




Fair enough, it is something that can certainly be improved in most case, just keep it in mind. A setup like this is ripe to be dialed in.

I'm certain you have found the limitations of the car, it will not take every corner as fast as you want, right?

It would be worth checking into to be sure you are getting the most out of your setup, but if you're happy with it, drive the wheels off of it. I would!

I could see a machined and/or welded support to that spacer setup you have to the bottom side of the shown knuckle. Tap some threads and bolt it on there. It would help reduce your compliance and anything you can help the robustness of your steering is a good idea.


1972 Barracuda - 5.7L Hemi, T56 Magnum 6spd - https://www.facebook.com/GoodysGotaHemi
2020 RAM 1500
[img]https://i.imgur.com/v9yezP9.jpg[/img]