Quote:

I didn't take any pics of the windage tray mods. The engine builder did the work and he had it all together before I showed up with the camera.

Main change since last time on the dyno was the oil pan. Also changed the valve covers in an attempt to stop the various oil leaks. Ran a belt driven water pump this time so we chould check for leaks but it didn't seem to cost any power. Engine still made almost identical power to a year ago even though the dyno cell had seen a number of changes. Power curve is very similiar to a Viper, 520/520.




Oh, you meant notch the windage tray. I thought you meant notch the oil pan.

Was this at the pick up tube to windage tray area? We did that too.