Quote:

With getting the right back spacing...you can also get an idea what you think will work, then just have him heat the outer up and drop the center in without welding it. You can try it out and he can move it around as needed until you get it spot on then they can be together.

When I had the initial set built for the Torana.. I had a center I bolted onto the car and some slightly oversized (ID diameter) outers that I could slide back and forth and got it just where I wanted it.

I have a spare set of wheels here too that I had made with the last of the forged centers, and went with the wider in back and slightly changed the back spacing on too. Just haven't gotten around to the wider tires yet.

If you didn't have wheel studs you could hold a wheel of mine under there...with the 265/35-18's on them. (no studs since mine is 5 on 4 3/4" of course )



Is your wheel guy still making the cast wheels?

And as for your wheel, we could just drill/bore a giant hole through the centers to make the mach up work.