Wade, glad to hear you have had some initial positive results with the solid end links. I almost pulled the trigger on a set of those last night but was not having much luck finding info on lengths and stud sizes on the different truck applications listed in this and the other thread. Questions: I assume you were running stock type links with poly bushings before? Are the solid end link studs the correct size for the LCA and sway bar mounts? I measured my poly end links to be right at 4" (LCA tab to sway bar,'74 Duster, Helwig bar and end links) From your pictures your bar appears to be fairly level but at 5.5" mine would be angled down quite a bit more, thoughts?