Yeah it is probably possible to do a low buck roller cam setup with Isky nodular rocker arms and old Chrysler triples or something like that and have it make almost as much power as a high dollar setup. I agree it would be kind of cool to do that type of article where you show some good power results with a well chosen selection of "cheap" parts.

But I had an interest in sorting out the Jesel stuff so I went this way with it. I might do a low lift vs. high lift comparison. I also have the option now of changing the rocker arm ratio pretty easily so I might try some 1.50 vs. 1.70 on the exhaust arm to see what happens there.

I'll put it together with the new deep dyno pan and run it that way. I might play around with the pan at some future time but right now I'm mostly interested to see how it will run with the big cam and the 1.70 rocker arms. I don't know if the pan makes any power difference or not. Pan testing is kind of messy.