Finding all of the small parts needed has been a PITA. I knew I had the correct pulleys for manual steering somewhere...along with the alternator and modified throttle cable brackets. Not to mention all of the correct length bolts and spacers. After a couple hours online I managed to sort out all of the fittings....hoses...and bolt on parts to get this installed. Aftermarket this and that just leads to modifying everything as nothing fits as stock did... First we did the Convertor and Flex Plate...then the Transmission and cross-member...then the starter... Since we upgraded to the 73 up spool mount K frame we also changed out the cross-member for the 73-up spool mount one. I used a shorter ground strap this time and I think it will work out better.
