Hi guys new guy to this forum. I was turned on to this place by the guys over at DodgeCharger.com, anyway here is what I'm working on....

A retro styled charger with twin turbos, fuel injection, and coil on plug ignition.

I have only began the parts buying and mock-up of the engine bay.

The intake is a Pro-Flow unit bought from Richard at West Coast cylinder Heads (http://www.proheads.com/) I'll also be buying my heads, cam and roller lifters form Richard.



I also got the 440 from a friend, it is a 74 out of a motor home. I'm glad it is nothing special so it wont bother me when it shoves a rod threw the block.



Here is the beautiful intake on the engine.



Cleaned it up and painted it, (not sure if it will stay black) and got it in the engine bay for mock up.





I have a small dilemma with the down pipe fitting on the drivers side with the brake booster. I think I will opt for a hydro-boost unit and a type II saginaw pump.

I have a few other parts gathered but I need to finish the repairs on the torsion bar cross member so I can install the trans for engine mock-up.

Let me know what you think.

THANKS