Quote:

Quote:

470"... 10.9:1 compression, pump gas, Box Stock Victor heads and manifold with a .670 lift solid roller with [Email]270@.050.[/Email] It made 711 horsepower with a 1000 cfm 4150 carb.



On whose dyno? Sounds to me.




Well, I just had my buddy read these posts about his combo and he laughed at all the doubt, but he did correct me at one thing and that was the carb. He only had two carbs, one 950 and the other a dominator. The Dominator is what made the 711 hp and the 950cfm 4150 made 694 hp. He also dropped on a set of stock performer RPMs as a comparison and the engine only made 620 hp. This same engine had a set of ported RPMs on it in the past and it made I believe 670 hp. But I guess all these numbers are all fabricated unless you actually witness the engine on a reputable dyno. Have fun tearing up these numbers to.


10.53 @ 125mph. 1.37 60 foot. Caltracs and Monoleafs, AFCO shocks.

Heads by INDIO MOTOR MACHINE; IMM.
CP Pistons, PC Carbs.