Quote:

It would be interesting to see how that combo of roller cam and std EZ heads would work. The only motor I built with the std EZ head didn't really work out so well. Once I had the EZ heads opened up to max wedge size they took off. But I'm sure if a person played with those heads a bit in std form they could be made to work. There are a lot of fast cars with heads that are worse than a std EZ!




I plan on upgrading my combo this winter with the 295 "Little Easy" CNC heads along with a small roller cam. My shortblock is a stock stroke 440 +.055 with Ross Flattop pistons. Heads will be cut down to abbout 65cc's.

2986863-newnikkon005.jpg (455 downloads)