Kenny that is a bad deal on the pistons. I'm glad you are moving on to bigger and more bada$$ pastures.
On the pistons being fly-cut - Was this to solve a PtV clearance issue? If so, can we re-hash what the rod/stroke combo was along with the cam specs? I'm getting into a similar scenario and was wondering if losing some quench/squishy was beneficial in lieu of cutting on the pistons (or changing to a dished piston).
My 511 low deck was really close on the PtV (.080 Ex, .100 In) and luckily only .020 had to be removed from the valve face. That was with a cam that checks out at less than .750 at the spring retainer.
