Today's project. The wheelie bar brackets were welded on at a slightly wrong angle. By the time I got the pinion angle right, the bars were only an inch or two off the ground. Tightening the adjusters made the bars look like a bow and arrow. Tires being fairly worn and poor shock adjustments, made them slap so hard, you could see smoke on the 3-4 shift. Oh well, didn't need those anyway.
So, I modified the brackets and got the adjustments right. Axle is on a 15 3/4" centerline height. Housing is level. Wheelie bars are 8" off the ground with 2" of adjuster threads showing.