Started to tackle what I feel is the biggest challenge. How to mount the fiberglass nose for quick release. Bolting it down to the original frame was easy. But to mount a free hanging glass nose onto a tube chassis seemed to me to be a stretch of the imagination. I bought a Chassis Engineering kit and just stared at it for a while like a deer in the headlights. I started by making sure that after the doors were mounted in alignment, I mounted the back of the nose aligned to the doors, or at least temporarily. I welded the slide tabs to the frame rails and inserted the lower cross tube. I ran a temporary support across the top of the nose to hold it up, fabricated some metal tabs/outriggers from where the fenders bolt to the lower valance and welded them to extending tubes from the cross tube, finally welding them together. Came out very solid. Next week, I will add all of the upper fender supports, and have to remember to order some Dzus kits from Summit.