Originally Posted By Quicktree
Originally Posted By cudaman1969
Originally Posted By Quicktree
Originally Posted By MR_P_BODY
I just used cheap wheel bearing grease with a
brush
wave
that's what I used, that is whats on the die, just been setting up for a while.

I hope you mean lube just the pins, instructions on my JD 32 said to never use lubricants on the forming dies groove, the tube will tend to slip backwards if used.
don't know nothing about the JD 32, I watched a friend who has bending tube for a long time he used grease on the die. mine never slipped.

Who knows, but I'll follow my instructions., besides, grease attracts dirt and grit which will scratch the tube and die then stress risers form, then all the extra work getting that mess off of everything, affecting the weld, no thanks, I'll do without it.