just dropped her in for the first time last night. comming in from the top was fine - only issue I had was the bleeder screw from the tierod was in the way of my lift's leg. Charlie's oil pan from ohio is a Perfect fit! some issues so far without the exhaust manifolds on looks close on the pass side shock tower. have the power steering gear box in now seems I may have to swap it out with a manaul box. flywheel and bell housing were not on and dont look like Ill get it on after for its too tight- will re pull her out to mount the bell housing and stock exhaust to recheck the fit. the stock fan will go because at the best will be one inch or less to the radiator- will opt with the electric double fans.
