|
|
Re: Ideas for a stout stock stroke 340 build.
[Re: B3422W5]
#1673979
09/19/14 09:10 AM
09/19/14 09:10 AM
|
Joined: Mar 2007
Posts: 1,608
Rudolph, Ohio
moparguy7074
top fuel
|
top fuel
Joined: Mar 2007
Posts: 1,608
Rudolph, Ohio
|
Quote:
I am thinking about building a 30 over 340 "big" motor to have as a backup to this 318, and perhaps at some point replace it 
I have access to a nice standard bore 340 with its unturned steel crank, bunch of stuff I wouldn't use,( stock rods and pistons)several stock 340 pans, timing covers, etc for real cheap.
I just wondered if say cnc procomp heads, moderate roller cam, zero deck flat top pistons could make 550 horsepower or better? Or any other heads, that are cheap and available
If not it wouldn't be a significant enough upgrade to be worth doing.
In my old age I am actually back into thinking Dusters/ Darts/ Demons with 340's in them are cool.
 
You need to talk to Bondo Bob. He has a pump gas 422 in his Dart Swinger with CNC Procomp heads. It is a full stock interior street car, and went 10.50's on the motor. He sprayed it last weekend at MMW and went 6.1? in the 1/8.  What your looking for can definitely be done!
|
|
|
|
|
|
|
