Quote:

What headers are those? There is no way my Doug's will fit with the steering angle crowding them...




TTI 2 inch tubes.

Now have more clearance than had with stock(Firm Feel modified) PS steering box. With stock box, header tube actually rested against box,,,had to shove engine slightly toward passenger side to gain 1/4 inch clearance. This box(Borgeson) gives more clearance than did Mopar box.

But with Borgeson I believe that steering shaft itself was a bit tighter to the Borgeson, until I shimmed it to correct its positioning on K member.

Last edited by Sxrxrnr; 12/10/14 09:40 PM.