I am running an E head 416 10:1 engine behind a wide ratio 833 4 speed with 3.23 rear. Racer brown SSH25/44 cam, TTi headers and H pipe, six pak. 8000 miles so far. It cost $8000 to build including exhaust & every misc nut and bolt.

Pump gas car, on last years tune up it ran 107 mph in the 1/4 3700 lb car with driver...do the math....this year it should run even faster-new tune up.

16 mpg, never runs over 190 degrees. 142 mph top end. Beats new regular corvettes [no Z06's will play]in stop light street racing, idles at 900rpm with 10-12" of vacuum.

To give you an idea of how much torque it makes: just using the throttle you can run the entire road coarse at Watkins Glen at speed in 4th gear...now that is torque!

Go for the stroker, [just don't be crazy with the cam choice]there is nothing else like it!