446 TRW slugs .060 in the hole....OOTB Eddys....Proform MB 750....M1.....Hooker 2" Super Comps....MP .509 hyd....HS 1.5 rockers....Coan 5200...Dana 4.56's
went 10.60's at 124 with a 1.40 60ft.
Probably a 3k pump gas motor...
Eric, did you buy most of this stuff used like the heads & HS rockers, If not, i don't see how you could have only 3K with 1400.00 heads, not so cheap rockers & 400.00 pistons not counting the other bolt-ons & cam/lifters/timing set/pushrods/bearings/rings/carb & all the machine work unless this was 20+ yrs. ago or you own a machine shop ., just saying, I did my 451 for 3600.00, but i only had 450.00 in the heads.
75 Duster, 451 10.87 @ 123.58 NA
97 Z28 6sp., 12.01 @ 115 on a 100 shot
71 Swinger. 360 magnum. 12.58 @ 105
78 cutlass, 469 BBC. 12.70 @ 108 on street tires.
http://www.youtube.com/watch?v=Z2kqNmMfheU
