It has electronic ignition.
I disconnected and plugged the pcv hose on the carb. Now it is running decent but making no power at all.
I also removed both valve covers again
-Everything is moving up an down
-All the pushrods easily spin
-The pushrods all go into the cup
-The rockers are on the right sides, the cup for the valve is toward the center
-Stock rockers
-Some rockers are marked I63+ while others are marked I62+
-On the passenger side all are I62+ except for the rear most
-On the driver side they alternate between I62+ and I63+ so some I63+'s are on the exhaust while others are on the intake.
Anyway, I think I am over my head now so I may be bringing it to a shop.