Quote:

Try adjusting the outboard idle mixture screws in the base plates to 1/4 to 1/3 out from gently bottomed out I found out the hard way that reducing or enlarging the idle mixture bleeds ended up affecting the AFR from idle to WOT Lots of gremlins out there



That is where they are. I was able to adjust most of my idle issue out with a little more timing and some adjusting today but it has me a 38* on total mechanical advance and 46* with the vacuum, so I have the vacuum unplugged currently. I think I am gonna pull the distributor tomorrow and work on shorting the mechanical. It's running a touch rich for my liking but not bad, better rich than lean that's for sure.

Careful, your character's showing!