Thanks, I wanted a bent bar across the top like you described but I could not of got to the top trans bolts. They are connected together right at the fire wall on the inside on the downward dash bars, I figured that would be good. The bottom does have jumpers straight to the lower structure, tieing it from moving up.
The double shock bars are because the snout bars are too far away from being under the inner fenders. I have to mount the coil over shocks at the stock location, running one bar up with a plate and some gussets off the side just didn't seem strong enough to me. I will have a plate between the bars
I thought about moving the motor backwards, my buddy did it.Now he straps 80 lbs to the front bumper to keep it down. I really wanted to avoid having to do that. Yes he has the front end tight as hell
Yeah my first project, still a lot to learn