Yeah, I did misunderstand. I'd have to remount the sensor as the difference in wheel diameter exceeds the available slot in the sensor. I'd also have to mod the #1 tooth first, and then make sure that the sensor is mounted in a new spot based on that #1.
I found some info on the Mag sensor but not on the TBI, but 2 of 3 wire colors match between them. The Mag is fed 8 volts according to the info I found (not teh standard 5 or 12 ). I think I'll apply the Mag info to the TBI Hall and see how it reacts, then compare it to the Ford stuff. Probably can't get to that until next week though.
Parts I seek:
driver doorpanel, 65 Sport Fury, prefer black, needs to be 7-8 on 10 scale, might buy set
16" x 6" Dodge truck wheel(s), from early 70s?, takes 9" dogdish - need for a research job so cheaper is better.
69-73 C-body caliper brackets and/or splashields
Send a PM.
). I think I'll apply the Mag info to the TBI Hall and see how it reacts, then compare it to the Ford stuff. Probably can't get to that until next week though. 
