Quote:

just out of curiosity, a question for those of you building your combos's with the heads mentioned. how big is the cam your running and at what compression ratio?




I gots me a .466+ lobe lift flat tappet from Barton that will go in first...Then a Old crane grind which has about .475 lobe lift roller. I say this cause i dont know what ration these rocker arms are, some say 1.6 some say less.

Compression is 14:1

Just a friendly debate, I dont get worked up over the internet...I laugh a bunch more than most normal people

Its winter time dang it....and I havent raced but twice in almost a whole year...now im starting to get mad.

Do i win a prize Dan-O for the largest flat tappet on the web site or something...

I guess it would be funny if I was running a .500 lift cam talking about all this flow.

Last edited by Bob_Coomer; 12/03/09 11:21 PM.

[color:"red"]65 Hemi Belvedere coming soon [/color]
[color:"#00FF00"]557" Indy engine 1.07 60ft 144mph in the 8th 2100 lbs package [/color]