|
Re: Indy Legend or Stage 5?
[Re: Bob_Coomer]
#544031
12/03/09 06:11 PM
12/03/09 06:11 PM
|
Joined: Nov 2004
Posts: 3,619 Norwich CT USA
Defbob
master
|
master
Joined: Nov 2004
Posts: 3,619
Norwich CT USA
|
Quote:
Dont forget about the newer MP/Edelbrock castings
These things flow a ton, and are the best thing out there for a hemi head that is a true SR type deal..stock valve angles, and port locations..
Modern cylinder Ported mine and got 460cfm from them.. The SR Stage V's wont flow that
I have all kinds of pics, and flow sheets..PM m if your interested I will email them too you.
Here is the flow data of my Modern Cylinder CNC Stage V standard port, standard valve heads:
"i was shocked by these numbers on the intake just as much as anyone looking at this,, this thing was wayyy good for a 2.250 valve.
superflow 600, 4.320 with bore notch, 28"
intake 2.250 .100-78.5 cfm .200-162.4 .300-257.5 .400-342.4 .500-396.5 .600-422.4 .700-440.7 .800-450.6 .900-456.5
exhaust 1.940 open at flange/2.0" tube .100-69.0/70.5 .200-146.2/152.4 .300-178.2/185.0 .400-208.4/220.8 .500-239.5/255.6 .600-259.1/274.0 .700-268.7/286.7 .800-273.7/293.6 .900-278.7/297.3
this is a std low exh port and a std int opening, its a good sized port but with only two pushrod tubes in the head, #1 and #5 exhaust. ferrea valves.
-Jeff"
|
|
|
|
|
|