Found the culprit! The bowl has lot's of debris in it as well!!!! Looks like pieces of rubber hose from the new hose I was trying to force over the end of the metal line on the frame! The rubber hose was too small of an ID!
I'm gonna syphon the fuel out of the bowl and clean it out as best as possible! I'm also going to turn the motor over with the line detached to see if more debris comes out of the line!
Any other suggestions????

I know I'll probably have to change the oil again! I estimate about at least half a cup of fuel made it down the intake!

Looks like I'll also be able to reuse the gasket!!!
Anything else I should do??