Sorry been away for a bit.
Thanks for the input so far.
Here’s a pic of the -10 plug I pulled out in number 7 hole.
Now I have put a new -10 plug in number 7.
Far as I got waiting to drive like you said an will report back.
Jets in the front are 92 by the way.
Idles screws are pretty close to a turn and a half out from when the carb was freshened with no runs on it yet

I’ll check the nitrous jets after I get this all figured out and get the heat range figured.
I think I’m try the above setup -8 motor and -10 nitrous