I believe it's the front crank seal, but I didn't get a chance to clean the engine up yet, the entire under side is covered in oil. I didn't have a hose long enough when I took it on a test drive, I'll try to grab one tomorrow to test it while driving. I don't know how it could even be building pressure at this point. I only drove it down the road maybe a mile or two and both breathers were open, I left the dipstick out of the tube and I left the oil fill cap off to vent any possible pressure that it could be building. It's not leaking from these areas either as they are dry.
Last edited by 73cuda340; 07/24/21 10:05 PM.