i believe they were the moog ones mentioned above, if i remember the studs are 1/2" and the holes one the hellwig were slightly bigger which then had slop. I drilled them out for the 1/2" bushings, then shaved them down to the bar. I figured this way they can wear out the bushing instead of the bar.







One could weld on higher mounts to compensate for this but I fear that the law of physics plays more havock on a long one compared to a shortened one, like a long lever vs a short one. Don't quote me on that as physics was not my strong suit:) I didn't do this as when these were discovered, I already welded up my LCAS and powdercoated them. I did strengthen the bracket and added to the sides as I read that some guys here were bending the brackets on their arms with the larger sized sway bars.