Quote:

---

So what have we learned so far from the useable information
1.Some type of wire mesh strainer in line between cell and pump.
2.Size of micron is still under debate.
3.Paper elements don't seem to be too popular.
4.One guy that thinks I'm a "geek" is concerned about mounting a filter directly to the pump Now I have seen some high end pumps with the filter mated to a common base with the pump
5.Most agree that a filter after the pump is a good idea.

Now I'm pretty sure that those fused brass ball filters and the single disc type filters are not considered "high performance" enough for the OP's application.

Anyone else learn anything constructive by reading this thread?
Just add to the list

Now I've been considering mounting a pump in the tank with a sock type strainer on the inlet and an inline filter about a foot from the outlet.
I found this to be a very good read. Linky: http://www.skspeed.com/p.aspx?u=Fuel%20Filters
Gus

---

I learned that this thread was similar/typical of all other threads,,,,'no matter what the topic, there WILL be an argument'.