Quote:

I am running the Kevco oil pan that holds 5 quarts in my small block. I run a little over 5 quarts in it because of oil in filter. I run a stock non HV or HP oil pump.My lifter bores are bushed with small holes in them and oil the rockers through the push rods.I shift at 6800 but have shifted at 7000. So far no problems. I have probably made 150 1/8 mile passes since last Sept.



Thanks for the reply! So roughly I was running close to the same as you were, and although my dipstick is not calibrated perfectly, hopefully its close enough that the oil I added to get back to the full line on the dipstick is the right amount of oil for my setup with the external lines and filter.