Using the P/S pump eliminator idler pulley/bracket (2013 models) with 6.1 heads, the idler pulley sits about 3/8" too far forward. Maybe the Apache or Eagle heads changed the mounting boss height. Guess i'll be breaking out the welder....

If you have an early block that uses SAE thread oil filters, using a jeep angled oil filter adapter uses metric filters.

Was hoping to bypass the A/C compressor with just the P/S eliminator bracket/pulley, but the belt will interfere with the belt tensioner.

8396918-IMG_1898768.jpg (232 downloads)
Last edited by ntstlgl1970; 01/15/15 06:08 AM.