Quote:

With the drag pack cam, (229int 236 ex duration, 110 lobe seperation) what kind of torque curve am
i looking at with a 3.888 arm? Any idea where to install it? My guess is start at 104? This will be a street motor with the Edelbrock dual four combo and two 500 cfm carbs, SRT8 jeep manifolds for exhuast.
Thanks very much to all those that have contributed, and keep it coming.
One thing I heard was the motor should be pre oiled, can be done through a pipe plug by the oil filter mounting location . Anyone care to add to that ? (equipment, does the motor need to be turned over, etc)



Your cam in a stock bore, stroke 5.7 12.5:1 comp with DP intake manifold. Cam was all done at 7000 rpm.

Edit...Wrong dyno sheet. I'll find it in a bit.

Last edited by hemidup; 03/20/13 08:45 PM.
Jerry Williams.