drilling TQ throttle plates? ***UPDATE***

Print Thread

Re: drilling TQ throttle plates? [Re: Rug_Trucker] #1256797 07/01/12 09:56 PM 07/01/12 09:56 PM
Joined: Mar 2005 Posts: 862 Iowa State fan kilroy OP super stock
kilroy OP super stock Joined: Mar 2005 Posts: 862 Iowa State fan	Quote: Where are the air bleeds on a TQ? Great thread! The bleeds are under the little removable plates beside the meter rods on top of the top plate. 1973 Charger, former SE, former auto I'm not trying to be difficult, it comes naturally....

Entire Thread
Subject	Posted By	Posted
drilling TQ throttle plates? *UPDATE*	kilroy	06/25/12 02:31 AM
Re: drilling TQ throttle plates?	Dan Halen	06/25/12 02:35 AM
Re: drilling TQ throttle plates?	kilroy	06/25/12 02:42 AM
Re: drilling TQ throttle plates?	DARTH V8Я	06/25/12 02:37 AM
Re: drilling TQ throttle plates?	kilroy	06/25/12 02:40 AM
Re: drilling TQ throttle plates?	RapidRobert	06/25/12 04:37 PM
Re: drilling TQ throttle plates?	Exit1965	06/25/12 02:42 AM
Re: drilling TQ throttle plates?	kilroy	06/25/12 02:44 AM
Re: drilling TQ throttle plates?	ahy	06/25/12 03:06 AM
Re: drilling TQ throttle plates?	DaytonaTurbo	06/25/12 04:35 AM
Re: drilling TQ throttle plates?	kilroy	06/25/12 04:52 AM
Re: drilling TQ throttle plates?	DaytonaTurbo	06/25/12 06:02 AM
Re: drilling TQ throttle plates?	superbeedave	06/25/12 04:10 PM
Re: drilling TQ throttle plates?	MY340	06/25/12 04:37 PM
Re: drilling TQ throttle plates?	kilroy	06/26/12 12:16 AM
Re: drilling TQ throttle plates?	Diplomat360	06/25/12 05:49 PM
Re: drilling TQ throttle plates?	kilroy	06/26/12 12:26 AM
Re: drilling TQ throttle plates?	Diplomat360	06/26/12 04:16 AM
Re: drilling TQ throttle plates?	kilroy	06/26/12 05:20 AM
Re: drilling TQ throttle plates?	Dave Watt	06/26/12 04:58 PM
Re: drilling TQ throttle plates?	kilroy	06/27/12 01:13 AM
Re: drilling TQ throttle plates?	Diplomat360	06/26/12 05:49 PM
Re: drilling TQ throttle plates?	Rapid340	06/26/12 06:24 PM
Re: drilling TQ throttle plates?	kilroy	06/27/12 01:17 AM
Re: drilling TQ throttle plates?	kilroy	06/27/12 01:22 AM
Re: drilling TQ throttle plates?	quickd100	06/27/12 03:17 AM
Re: drilling TQ throttle plates?	kilroy	06/27/12 03:43 AM
Re: drilling TQ throttle plates?	DARTH V8Я	06/27/12 03:52 AM
Re: drilling TQ throttle plates?	kilroy	06/27/12 11:48 PM
Re: drilling TQ throttle plates? *UPDATE*	kilroy	07/02/12 12:30 AM
Re: drilling TQ throttle plates?	Rug_Trucker	07/02/12 01:53 AM
Re: drilling TQ throttle plates?	kilroy	07/02/12 01:56 AM
Re: drilling TQ throttle plates?	kilroy	07/02/12 03:24 AM
Re: drilling TQ throttle plates?	440newport	07/02/12 03:50 PM
Re: drilling TQ throttle plates?	kilroy	08/02/12 03:59 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To