Quote:

PCV baffle needed. More then likely you have a bad intake gasket. Put back on dbl pumper and jet 66 frt 72-74 rear and make sure power valve is good. The performer intake will squirm when installed more then likely caused a gasket leak



Just changed the gaskets last week to steel felpro replacements. I thought I spotted a small break about a half inch long near the bottom of the right side intake gasket.

I am driving it quite a bit the past few days to track the oil consumption. As stated, the baffles are on the valve covers.

2016 Ram 1500 Crew Cab: 5.7, 65RFE, 4.56 gears with locker, Hemifever tuned, AFE intake, 87mm throttle body, JBA headers, 3" Flowmaster exhaust, split to dual 2.5" exits. 13.57 best ET so far.

Searching for new A or B Body Project!