I have 70 bronco with all wheel drums and now have a pull to the left.
check lining adjustment on the pass sides & if all good then open em up for a visual. EDIT probably wouldn't hurt to check/equalize the adjustments on all 4 corners
Thanks Robert. It has self adjuster star wheels. So get under there and turn until they hang up a little? I will start my own thread once I get going as I don't have the tool or knowledge yet to pull hubs.
Better way to adjust your brakes is to tighten up your star adjusters all the way tight and then back off.. Seems to set the brakes into the drum better..
If you count the clicks, as you back off, you can do the same with the other side....
