Quote:

Is there a way to test the Breakerless ignition I put in? If there is a vacuum leak and I spray the area w/ starter fluid, will it bubble like a hole in a tire does?

A parts house can test an ECU but if it doesn't act up when they test it then we are not going to have a valid test but I would have them test it(our run of(bad) luck has to change ). I for sure hate throwing parts at a car expecially after my contributions. Do you have another vehicle that you could borrow the ECU from. An intake sucks the fluid in as opposed to a tire that bubbles it outward & if any fluid is sucked in through a pinhole leak it changes the idle because you are improperly adding extra fuel & drastically changing the mixture & the idle speed/quality will change & I'm thinking that if this was just condensation & if the ECU is the culprit that there might not be any intake issue so I would start there with the ECU. EDIT & white smoke that is what we call steam so you're good there.

Last edited by RapidRobert; 12/29/08 11:55 PM.
live every 24 hour block of time like it's your last day on earth